Engineering Transactions, 56, 4, pp. 311–324, 2008
10.24423/ENGTRANS.187.2008

Strain hardening under non-proportional loading in polycrystalline aluminum alloys

W. OSIPIUK
Białystok Technical University, Białystok
Poland

K. ŁUKASZEWICZ
Białystok Technical University, Białystok
Poland

In the paper it is postulated that the so-called common slip domains influence the character of the strain hardening phenomena for complex loading paths. The slip domains were evaluated on the basis of the Batdorf–Budiansky slip theory of plasticity. Evolution of a yield surface for different non-proportional tension-torsion loading paths was determined for PA4 aluminum alloy and the hypothesis that the strain hardening depends on the development of the common slip domains was shown to be justified.
Full Text: PDF
Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN).

References

Z. L. Kowalewski, Creep of metals: experiment and modeling [in Polish], IPPT PAN, Warszawa 2005.

J. Lin, Z. L. Kowalewski, J. Cao, Creep rupture of copper and aluminium alloy under combined loadings-experiments and their various descriptions, Int. J. of Mechanical Sciences, 47, 1038–1058, 2005.

F. Barlat, J. M. Ferreira Duarte, J. J. Gracio, A. B. Lopes, E. F. Rauch, Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample, Int. J. of Plasticity, 19, 1215–1244, 2003.

H. P. Feigenbaum, Y. F. Dafalias, Directional distortional hardening in metal plasticity within thermodynamics, Int. J. of Solids and Structures, 44, 7526–7542, 2007.

W. M. Mair, H. L. D. Pugh, Effect of prestrain on yield surfaces in copper, J. Mech. Eng. Sci., 6, 150–163, 1964.

Z. Mróz, W. Trąmpczyński, D. R. Hayhurst, Anisotropic creep hardening rule for metals and its application to cyclic loading, Int. J. of Plasticity, 4, 279–299, 1988.

Z. Mróz, W. Trąmpczyński, On the creep hardening rule for metals with memory of maximal prestress, Int. J. Solids Structures, 20, 467–486, 1984.

S. B. Batdorf, B. Budiansky, A mathematical theory of plasticity based on the concept of slip, NACA, TN 1871, 1949.

P. Dłużewski, Continual theory of dislocations as a theory of constitutive modeling of finite elastic-plastic deformations [in Polish], IPPT PAN, 13/96, Warszawa 1996.

T. H. Lin, S. G. Ribeiro, Development of a physical theory of plasticity, Int. J. of Solids and Structures, 17, 545–551, 1981.

Y. F. Dafalias, Orientation distribution function in non-afine rotations, J. Mech. Phys. Solids, 49, 2493–2516, 2001.

M. V. Glazoff, F. Barlat, H. Weiland, Continuum physics of phase and defect microstructures: bridging the gap between physical metallurgy and plasticity of aluminum alloys, Int. J. of Plasticity, 20, 363–402, 2004.

I. S. Nikitin, Constitutive equations of the elastoviscoplastic model and slip theory, Mechanics of Solids, 42, 260–270, 2007.

A. Needleman, M. E. Gurtin, Boundary conditions in small-deformation, single-crystal plasticity that account for the Burgers vector, J. of Mechanics and Physics of Solids, 53, 1–31, 2005.

G. Winther, D. J. Jensen, N. Hansen, Dense dislocation walls and microbands aligned with slip planes – theoretical considerations, Acta Mater., 45, 12, 5059–5068, 1997.

N. Hansen, X. Huang, D. A. Hughes, Microstructural evolution and hardening parameters, Mater. Sci. Eng., A317, 3–11, 2001.

M. P. Ariza, M. Ortiz, Discrete Crystal Elasticity and Discrete Dislocations in Crystals, Arch. Rational Mech. Anal., 178, 149–226, 2005.

D. Hull, D. J. Bacon, Introduction to dislocations, (Fourth Edition), Pergamon Press, Oxford, 2001.

J. Adamczyk, Theory of metals – Part 3. Plastic straining, hardening and fracture [in Polish], Silesian University of Technology, Gliwice, 1993.

H. J. Frost, M. F Ashby, Deformation – mechanism maps. The plasticity and creep of metals and ceramics, Pergamon Press, Oxford, 1982.

K. Przybyłowicz, Metallurgy [in Polish], WNT, Warszawa 2003.

R. J. Asaro, B. Zhu, P. Krysl, R. Bailey, Transition of deformation mechanisms and its connection to grain size distribution in nanocrystalline metals, Acta Mater., 53, 4825–4838, 2005.

W. Osipiuk, Non-elastic deformation and fracture of metals [in Polish], Białystok Technical University, 1999.

K. N. Rusinko, Theory of plasticity and non-stationary creep [in Russian], Lvov, Visca Skola, 1981.

F. Morel, A critical plane approach for life prediction of high cycle fatigue under multiaxial variable amplitude loading, Int. J. of Fatigue, 22, 101–119, 2000.

M. Anisimowicz, Investigation of vibrocreep of metal alloys under plane stress state [in Polish], IFTR, IFTR Reports, 1978.




DOI: 10.24423/ENGTRANS.187.2008